2-in-1 LAN Tester DMM

The MTC50 is a 2-in-1 LAN tester as well as an auto ranging multimeter. This meter is a newly designed and very practical tester that can easily read the correct pin configuration of 10/100 Base-T cable (Category 5), 10Base-2 cable (coax), RJ45/RJ11 modular cables, AT&T 258A, 356A, TIA-568A/568B and Token Ring cable by comparing one transmitting end to the corresponding receiving end. With the remote kit test cables can be installed over long distances either on wall plates or patch panels. It is easy to verify the cable continuity, open, short and cross-connect. The auto range digital multimeter allows the user to measure AC and DC voltage, AC andDC current, Resistance, Continuity and Diode test.Features:– 2-in-1 LAN Tester and Digital Multimeter- LED displays the actual pin configuration and tests the correct pin configuration of 100Base-T, 10Base-T, 10Base-2, Thin Ethernet cable, RJ45/RJ11 modular cables 356A, TIA568A/568B and Token Ring cable etc.- With remote kit it can remotely test cables up to 300m away either on wall plate or patch panel- Can test the grounding- Provides easy to read continuity and fault status display- Measures ACV and DCV up to 600V, ACA and DCA up to 200mA,- Locked Status wiring function- LAN Testing- Tests CAT 5 Installations

Specifications

– DC Voltage: 200mV to 600V (1.0% +3)- AC Voltage: 200mV to 600V (1.0% +5)- DC Current: 200.0 A to 200.0mA (1.5% +3)- AC Current: 200.0 A to 200.0mA (1.8% +8)- Resistance: 200.0 ohms to 20 megaohms (1.2% +3)- Continuity: Beep is less than 100- Test Pin Configuration: 10 Base-T; 10 Base-2 Twin Ethernet Cable100 Base-T, RJ45/RJ11 Modular 258A, tia-568a/568d, Token Ring Cables- Battery: 9V Battery, 2 x AA Battery- Size: 162 x 75 x 43mm- Weight: 308g